Skip Ribbon Commands
Skip to main content
Navigate Up
Sign In
BUILDING VALUE SINCE 1906

 

How to make your High Pressure Laminate Toilet Partition selection:

  1. Select mounting configuration
  2. Pick color or pattern
  3. Choose desired hardware
  4. Choose desired dividers/screens.

Model number example:
Overhead-Braced, Tungsten EV, Full-Height Hardware: 1032.65, 4814

 

RapidResponse 

Distributors
 



 

High Pressure Laminate

TrimLineSeries™ 1030

  • Stainless steel edge trim
  • Concealed stainless steel hardware
  • Non-ghosting graffiti removal
  • Scratch, dent, impact resistant
  • 5-year limited warranty
  • Industrial-grade particle board
  • Class B ASTM E84
 
Mounting Configurations
Standard HIGH PRESSURE LAMINATE Colors AND FINISHES:

 


Important Note:

* Premium colors carry an up-charge not to exceed 10% of total cost.

Panels over 60” wide with directional patterns and finishes will be spliced, joining the 2 pieces on the particle board at an additional charge. HPL colors are printed reproductions and are for descriptive purposes only. Refer to manufacturer’s samples for absolute color fidelity. Color guides and samples are available from Bobrick on request.

RapidResponse®: Lead-time for 35 Standard Colors, on orders of up to 15 compartments is 10 business days after order approval.

Lead-time for a substantial selection of stocked Wilsonart®, Formica®, Nevamar®, and Pionite® colors, on orders of up to 15 compartments, is 20 business days after order approval.

Wilsonart, Formica, Nevamar and Pionite are registered trademarks of Wilsonart International, Formica Corporation, Panolam Industries and Pionite Decorative Surfaces, respectively.
Stainless Steel Hardware
 
Standard Concealed Stainless Steel (1030)
  • Heavy-gauge type 304 stainless steel
  • Hinges adjust for partial opening or self-closing
  • Slide latch with keeper
  • Clothes hook
  • Emergency access inswing doors
 
 
Steel-Core Base Leveling Device (1030)
  • 11-gauge core welded to 3/8" (10mm) leveling bar
  • Forms single structural unit
 
 
Optional Full-Height Stainless Steel (1030)
  • Heavy-gauge type 304 stainless steel
  • Self-closing hinge runs full height
  • Full-height angle bracket and U-channels
  • Reinforced latch, keeper
  • Emergency access inswing doors
  • Add suffix .65 to 1030 Series Number
 
Standard Factory-Installed Threaded Inserts
  • Provide metal-to-metal contact for securing door hinges 
  • Pre-drilled for ease of installation
 
ASTM E 84 Surface burning characteristics

ASTM E 84 Interior Wall and Ceiling Finish Classification (click to view larger)

Please see Technical Bulletin TB-73 

         
DRESSING COMPARTMENTS, URINAL SCREENS
divider
Overhead-Braced Dressing Compartments

Curtain track and hooks in headrail.

Overhead-braced configuration can be furnished with curtains, curtain track and hooks concealed in headrail.

Wall-Hung, Floor-Anchored,
Post-To-Ceiling Screens

Coordinate urinal, entrance screens, shower dividers and dressing compartments with toilet partitions. Select Solid Color Reinforced Composite or Solid Phenolic for wet areas.

Durability

 

         

TrimLineSeries™ Shower dividers, dressing compartments,
and urinal screen model number summary
Mounting
Configuration
Dressing Compartments
Class B
Urinal Screens
Class B
Overhead-Braced 1032
Floor-Anchored
1031
Post-To-Ceiling
1033
Wall-Hung
1035
Ceiling-Hung
1038
TrimLineSeries™ Toilet Partition Model Number Summary
Mounting
Configuration
Standard Hardware Optional Full-Height Hardware
Floor-Anchored 1031 1031.65
Overhead-Braced 1032 1032.65
Ceiling-Hung 1038 1038.65